If you are looking for a sporty 200 cc bike, you can consider Bajaj Pulsar NS200. Bajaj Pulsar is presently available in two variants. One is NS200 and the second one is RS200. The difference between the two variants is that of the fairing. The RS variant is a full-fairing bike, whereas NS200 is a naked bike. It looks more aggressive, and you can certainly go ahead with that. The Pulsar NS200 looks aggressive and comes with nitrox suspension for a comfortable ride. Bajaj Pulsar NS200 also gets ABS brakes for superior stopping power. The bike also gets some great technical features like the auto headlamp.
Regarding the engine and the transmission combination, Pulsar NS200 comes with a patented triple-spark DTS-I 4V FI 6-speed gearbox engine. The engine is matted with a liquid cooling system to keep the temperature under control. Overall, Bajaj Pulsar NS200 is a competent bike that works well for you. Some people like to maintain their bikes, and if you are one of them, this article is for you. On this page, we have compiled some very critical & useful information about the engine oil for Bajaj Pulsar NS200. So, let us now move ahead and check out the details of the engine oil for Pulsar NS200.
Bajaj Pulsar NS200: Engine Oil Grade
Bajaj gives you two options for the engine oil for Pulsar NS200. The first option is 20W50 JASO MA2 API Synthetic Engine Oil, and the second is 10W50 JASO MA2 API Synthetic Engine Oil. You can use any of these two engine oils. The JASO MA2 grade is also an important factor to consider since this grade denotes that the engine oil is compatible with the catalytic converter in the exhaust system. We assume that your bike is a BSVI bike since the lower versions are no longer sold. So, make a note of this engine oil grade, and this will keep the engine working as expected.
Engine Oil Capacity of Bajaj Pulsar NS200
The next important thing is the engine oil capacity for Bajaj Pulsar NS200. This engine requires 1200 ml engine oil whenever you are going for a service. However, while filling the engine oil, you must also keep an eye on the engine oil gauge to ensure that you are not overfilling the engine oil in your Pulsar NS200. If you have been through an engine oil, then 1200 ml engine oil is insufficient. Per the user manual, you would need 1400 ml of engine oil for an engine overhaul. Overfilling the engine oil interferes with the working of the clutch; hence, if you overfill the engine oil in error, we recommend draining it immediately.
Top 3 Engine Oil for Bajaj Pulsar NS200
Let us now look at the top three engine oils available for Pulsar Pulsar NS200. We have checked the grade of the engine oil, and you can order the quantity as per your need. We assure you that the products listed below are superior, and you will get the best performance and mileage when you use any of the listed engine oil for Pulsar NS200.
#1 Motul 7100 4T 10W-50 API SN Fully Synthetic Petrol Engine Oil
Bajaj recommends two grades of engine oils for NS200. Motul 10W50 is thinner than 20W50 at starting temperatures, so it is better. It can keep the engine clean, and it also improves the performance of the engine. The reason it is the most expensive engine oil on the list is also that it has a better grade (10W50) when compared with the second recommendation from Motul. If you don’t mind spending extra on quality, this engine oil is for you.
Pros
- It improves the performance of the engine.
- It keeps the engine clean and increases the life of the engine.
- It helps in improving clutch performance and mileage.
- Highly durable oil with the lowest burn rate.
Cons
- This is one of the most expensive oils on the list.
#2 Motul 104103 7100 4T Fully Synthetic 20W-50 Petrol Engine Oil
It is an undebatable fact that Motul is one of the best engine oil manufacturers. In such a case, if you find the first option on our list to be expensive, then you can consider Motul 20W50. This variant of engine oil is approximately 40% cheaper than the 10W50 variant of Motul. If you use this engine oil, you must wait for the engine to warm up before you start revving the engine hard. Apart from this, you must buy any Motul product from a trusted source like Amazon to ensure that you get genuine engine oil.
Pros
- It is 20W-50 and hence more affordable.
- Reduced engine friction and works under extreme pressure.
- It improves mileage and acceleration.
- It has a long life since it is fully synthetic oil.
Cons
- You need to be careful of counterfeit products.
#3 Castrol POWER1 CRUISE 20W-50 4T Synthetic Engine Oil
The last option on the list is Castrol. This engine oil is especially for people who take long rides or who go on road trips on their bikes. It maintains the temperature of the engine very well, and it also keeps the engine like new. You get improved performance and better mileage with Castrol engine oil. You will feel as if your bike is gliding over the roads. It is also one of the most affordable options available for NS200.
Pros
- It is designed for long rides and stressful riding conditions.
- It doesn’t thicken with time and hence keeps the engine clean.
- Works well with almost every performance bike.
- It is an affordable option.
Cons
- The quality of Motul is better.
Conclusion
This was all the basic information about the engine oil for Bajaj Pulsar NS200. While you are serving your bike, you can also refer to the user manual to understand the other steps you need to carry out. Please ensure you are not mixing lubricants and fluids of two different grades. This applies to engine oil, brake fluid, coolant, and any other fluid you might be adding to the bike. You can occasionally carry out a full engine flush to decarbonize the engine and improve its performance. Lastly, the recommended interval for the engine oil replacement is 10,000 Km. In addition, you need to top-up the engine oil after every 5,000 Km. For any other doubt, please reach out to us via comments.